Linux for architects
This is a little introduction to Linux for you architects who have never tried it, but would like to know what's all the fuss about it and if it is really usable for working with architecture. If you know Linux already, I'm sure you'll find a lot of missing info in this text and find it maybe a bit too enthusiastic, but we are whowe are, aren't we...
This article is a sequel of another short article
I wrote back in 2009 to present some tools available to architects on the Linux platform.
Just a small note, What it is exactly?
Actually it's wrong to call Linux Linux. Linux systems are not all-in-one, monolithic things like Windows, but rather a complex assemblage of software pieces, Linux being only the base block.
Linux is based on Unix, its predecessor, and follows a basic Unix philosophy: Rather than having one huge all-in-one application that does 1001 tricks, have 1001 small applications that do each one one simple task, but do it well.
Most of the other pieces come from a project called GNU, that's why those systems are usually called GNU/Linux and not just Linux. But let's make it simple and continue to call it Linux.
Of course make those thousands of small applications all work seamlessly is not a small work, but fortunately it has been done a lot of times already. This is where comes what we call a Linux distribution, which is a complete operating system, based on GNU/Linux, made of hundreds of little pieces, all working in a big symphony. Ubuntu is one of the most famous Linux distributions.
First things first, Why Linux Is For You
- Linux is free. This means not only that you don't pay anything, but also that you are free to do what you want with it: download it, distribute it, share it on bitTorrent, (you caneven sell it), without having to do anything or report to anyone. Like GNU people use to say, it's free like freedom, not free like free beer
- Much more important than being free, it will stay free forever. Like most free software, its code carries a license that prevents it from being bought by a firm and stop being free.
- Your distribution doesn't only provide you with the Linuxoperating system, but with almost any piece of software that runs on Linux. As a consequence, all your applications can be installed easily from your distribution's servers, and your whole computer, not only the operating system but ALL yourinstalled applications, are updated automatically.
- Linux inherits another very important thing from Unix: The rock-solid built-in protection of networking, files, processes and users. As a consequence, Linux is almost invulnerable to viruses (there is no Linux virus known today) and easily protected against network intrusions.
- Linux and most free applications that runs on it are programmed and maintained by people who have no commercial reasons to do it. They do what they think is best, not what they think will sell better. Your software will never force you to buy a new computer (Linux and most free software run fine on very old hardware) or a new plugin, and software evolves extremely fast (new features land on your system almost every single day).
- People who make free software are extremely social. You find them easily, talk to them, discuss, share ideas, and easily get involved in directions your favorite application is taking. All happens through forums, email discussions, chat rooms or facebook pages. If you miss some feature and you can convince people of the importance of your claim, chances are high that someone will implement it.
- Linux can safely be installed side-to-side with another operating system such as Windows. A menu will then appear, at boot time, to allow you to choose which system to boot to.
Of course nothing comes without disvantages. Here are a few issues you might expect:
- Bleeding-edge new hardware might not be totally supported yet. Nobody has commercial urge to make Linux work for your particular hardware, so you usually have to wait until some Linux programmer will get one for him, be annoyed be the fact it isn't supported, and remedy the situation. It's always a good idea to test before installing or investigate before buying.
- Windows software doesn't run on Linux systems. You will need to get used to other applications. But most of the usual ones have one or many excellent or even much better alternatives in Linux, and nowadays more and more applications such as Google Chrome, Firefox or Open Office can run on both Windows and Linux. Some more specialized commercial-grade applications such as engineering applications still don't have a Linux alternative, though. You will sometimes need to do some homework and find workarounds to palliate to that situation.
- There is no firm behind Linux. Nobody to call, nobody to complain to. Although some firms may offer you tech support, you are on your own in most cases. But fortunately most answers are very easy to find on the internet, a simple search like "How to resize a picture in Ubuntu" will usually give you an easy and immediate answer.
So what does it look like?
If you managed to read until now, you must be a bit curious to see what it looks like, right? I gathered here a couple of screenshots from the most common distributions:
Below is the latest version of Ubuntu
, probably the most famous of all Linux distributions, and one of the most friendly to new users. In this version, Ubuntu introduced a new way to navigate through your files and applications, called Unity, which is the vertical bar containing icons on the left:
Another very good distribution is LinuxMint
. Linux Mint is based on Ubuntu, so it inherits all the qualities of its father. But its developers put a special effort into style and design, so Linux Mint is often the favorite distribution used by artists:
This is another of the most famous ones among new users, called Fedora
. Fedora is derived from a famous commercial Linux system called Red Hat, and it inherits from it a great deal of novelty and power. Fedora is usually liked because it brings bleeding-edge features faster than the others:
But most Linux systems are deeply customizable, and you can usually make your desktop look like your wildest dreams. Here is, for example, a screenshot of my own desktop:
How to get it
Most Linux distributions have a great feature: The installation CD is also a Live CD, that allows you to run your Linux system entirely from the CD, without installing anything. This is a great way to test, to see if it runs well, and if you like it at all, without risking to do any harm to your current system. The proceeding is very simple:
- Download an .iso CD image from one of the distribution sites indicated above. Sometimes they have several flavours, such as 32bits or 64bits. Choose one that suits your computer. Since a full CD image is a big file (700Mb), Most of them allow you to download it via bitTorrent if you prefer. Some even provide DVD versions, which include more pre-installed applications.
- Burn that image on a blank CD. Be careful, burning an image is not the same thing as copying a file on a CD. Simply copying the .iso file on the CD won't work, you must either right-click on the .iso file and select a "burn this image to disc" option, or open your disk burning software and find the "burn disc image" option. When your disk is burned, it will contain several files, not the .iso file.
- Now place your fresh CD in your CD drive, and reboot your computer. On some systems, you must allow your computer to boot the CD before booting the Hard drive, this is usually done by pressing a key (F2, F12) during the first seconds after powering up and selecting your CD drive in a list.
- Your new operating system will now boot. Remember that nothing is copied to your computer, so you can play safely with everything, there is no risk to harm anything. Just remove the CD and reboot, and you'll be back to your original operating system. But remember too that nothing you do while you are running from the CD will be saved, so you will loose any work you do during that time.
- Most Linux distributions, when running from the CD, will have an "Install to Hard Drive", icon, which you can use when you are ready to install. You will then be taken to a step-by-step install procedure.
Now where are the file explorer, the internet explorer, the windows messenger, the acrobat reader, photoshop, skype, notepad, word, excel? Well, almost none of those are there, but all have at least one equivalent. Explore the menus and you will find everything in no time. And if something is missing, it can easily be installed by the system itself.
This is, for example, the Ubuntu software center, from where you install just about anything:
Okay, after all this bla-bla, what about doing architecture work?
The problem you'll encounter with Linux is that none of your usual architecture software will work. No Autocad, no Revit, no Archicad, no Vectorworks, no 3DS Max, no V-Ray. Those are all windows-only (some run on Mac too), and it's very unlikely that their developers will want to spend time in doing a Linux version in the near future.
So, how bad exactly is the situation?
Actually it is not bad at all, but you will need to learn to use new software, there is no way to avoid that part. Apart from that, it is actually possible to work without any problem.
In the 2D CAD field, we have a couple of options now. Some are totally free, like QCad
or the new and promising LibreCAD
. Those, since they are maintained and developed by a community, might lack some commercial features like DWG format compatibility. This is LibreCAD:
We also have several commercial applications, which are not free, but run natively on Linux, and have all the features that you would expect from a commercial application, such as DWG compatibility and technical support, like Ares Commander
. Here is BricsCAD:
And, since a couple of months, we now have a free AND commercial application called DraftSight
. DraftSight, although owned by a company, is distributed for free, and supports DWG format natively:
3D CAD & BIM
Here unfortunately things are less easy. There is at the moment no ready solution, but there are several efforts going in that direction, so the future is promising. One of these efforts is an application called FreeCAD
to which I have the honor to contribute with coding in my spare time. FreeCAD is a full modern parametric modeler, and although very young, it already has a lot of interesting functionality for doing architecture, such as a 2D drawing module, usual 3D tools such as extrusion and booleans, and a 3D-to-2D module. A real BIM module is also in development.
I write a lot
about FreeCAD on this blog...
3D MODELING & RENDERING
In the area of 3D rendering, things are not only better but state-of-the-art, thanks to an amazing piece of software called Blender
. Blender runs on windows too, so chances are high that you heard about it already. Blender is for me the best general-use 3D application available today. Better than 3DS Max, better than Maya. It is faster, smaller, and made by 3D users instead of made by Autodesk. Blender can do everything that those 2 applications can do, and has several external renderers available.
The only drawback of blender is that it can be hard to learn if you are much used to another 3D application. But I warned you about that already...
In fact, I use Blender so much that it is now not only what I use to do rendering, but also to compose architecture:
I also write a lot
about Blender, there are also many tutorials on the homepage
of this site.
But there is something I didn't tell you yet. Remember I told Windows applications don't run on Linux, right? Well it's not totally true. There is a little gem of a software, called Wine
, which allows to run Windows applications on a Linux system. It won't work with all applications, and many will run with problems. But one of the applications that runs almost perfectly is Sketchup
! Installing Windows applications with Wine is nowadays almost as easy as installing them on Windows, and they integrate seamlessly on your desktop (But of course it is never as comfortable and fast as running a native Linux application). The Wine website
has a list of windows software that runs with it, with ratings, comments and notes.
2D PAINTING & PHOTO-COMPOSITION
What would be of us architects without photoshop, right? The most famous Linux photoshop-like application is called Gimp
, and, although many purists will argue that it lacks some or another indispensable photoshop option, is an excellent and very mature application, totally able to perform all the tasks architects usually require from photoshop, and, thanks to the typical friendliness to extension and customization found in most Linux applications, you can extend it into a very powerful digital painting platform.
To give you an idea, this is the kind of drawing that you can achieve with gimp only:
But a lot of digital artists use Linux nowadays, so there are many more interesting tools available, like MyPaint
Another must-have Linux application is inkscape
, which is a vectorial drawing application, similar to Corel Draw or Illustrator. It is commonly used for drawing diagrams, icons and vector artwork, but is perfect for mounting more complex presentation sheets.
Also worth noting, many of those applications also run on windows, so it's a good place to try.
Are there architects out there who use Linux?
Because of all the little problems but mostly because it is not very well known, very few architects use Linux at this time. But things are changing fast... Here is a list of interesting people who share tips, techniques and resources about the subject: